Details
CO2 SET POINT CONTROLLER
The SPC-1 is designed to easily monitor and control CO2 enrichment. Just set it and forget it. This appliance is recommended for indoor use only.
HOW THE SPC-1 WORKS
The SPC-1 samples the air and determines the concentration of CO2 in PPM. Then when indicated by your set point values (desired PPM CO2 and elevation), the unit will activate CO2 enrichment equipment plugged into the piggy back cord. The SPC-1 has a fixed hysteresis (differential) of 20 PPM.
EXAMPLE: With a CO2 set point of 1000 PPM, the unit will activate (turn "ON") whenever concentrations fall below 1000 PPM and continued to control and allow your CO2 equipment to enrich your environment until it detects about 1020 PPM. The SPC-1 is a reactive CO2 controller and the PPM concentration of CO2 will float above 1020 PPM after defeating enrichment equipment (overshoot).
Features
- Set and Forget; Easy to install and operate
- Factory calibrated and inspected for precision performance
- Preset hysteresis (differential) of 20 PPM
- Photo Sensor to defeat CO2 enrichment at night (dark)
- Large LED display offers real-time CO2 PPM
- Orange LED to indicate when CO2 enrichment is active
- Elevation adjustment feature for improved accuracy
- Fully integrable with other atmospheric controllers or timers
- Durable black anodized aluminum chassis resists rusting, corrosion and scratching
- Red illuminated power switch
- 14 AWG, SJTW rated piggy-back power cord
- Operates on 120 VAC at 60 Hz, 12 Amp switching capacity
Additional Information
| Video | No |
|---|---|
| Downloads | No |
| Directions | No |
| Manufacturer | N/A |
| Filter By | N/A |
CO2 SET POINT CONTROLLER
The SPC-1 is designed to easily monitor and control CO2 enrichment. Just set it and forget it. This appliance is recommended for indoor use only.
HOW THE SPC-1 WORKS
The SPC-1 samples the air and determines the concentration of CO2 in PPM. Then when indicated by your set point values (desired PPM CO2 and elevation), the unit will activate CO2 enrichment equipment plugged into the piggy back cord. The SPC-1 has a fixed hysteresis (differential) of 20 PPM.
EXAMPLE: With a CO2 set point of 1000 PPM, the unit will activate (turn "ON") whenever concentrations fall below 1000 PPM and continued to control and allow your CO2 equipment to enrich your environment until it detects about 1020 PPM. The SPC-1 is a reactive CO2 controller and the PPM concentration of CO2 will float above 1020 PPM after defeating enrichment equipment (overshoot).
Features
- Set and Forget; Easy to install and operate
- Factory calibrated and inspected for precision performance
- Preset hysteresis (differential) of 20 PPM
- Photo Sensor to defeat CO2 enrichment at night (dark)
- Large LED display offers real-time CO2 PPM
- Orange LED to indicate when CO2 enrichment is active
- Elevation adjustment feature for improved accuracy
- Fully integrable with other atmospheric controllers or timers
- Durable black anodized aluminum chassis resists rusting, corrosion and scratching
- Red illuminated power switch
- 14 AWG, SJTW rated piggy-back power cord
- Operates on 120 VAC at 60 Hz, 12 Amp switching capacity
Write Your Own Review
You have no items in your shopping cart.
