Details
The Spinner is a fully enclosed hydroponic plant growth chamber in which the plants are automatically rotated ON THEIR OWN AXIS, exposing the plant to a vertically mounted, central light source. Roots in the chamber are feed hydroponically via “ebb-and-flow”.
The atmosphere is controlled via two 100+CFM intake/exhaust fans. What this means is that the plants within the Spinner receive the ultimate care with very little maintenance. Typically the Spinner will yield a greater dry plant mass with only 600 watts of power than a traditional hydroponic system using over 1000 watts and the quality that comes from the Spinner is exceptional!
The Spinner offers the same yield-per-watt ratio as hydroponic systems that use over 10x the number of plants. Due to the fact that plants in the Spinner are rotated on their axis they are able to grow much larger without growing into the hot agricultural bulb. Eye hole snaps are located in the lid of the Spinner so that plants can be tied when they start to put on weight.
Using fewer plants has many advantages including, but not limited to:
- Lower cost between crops; other systems require the user to spend over $200 per crop for the mineral fiber rooting medium, the Spinner requires less than $10 worth of mineral fiber per crop, and can also be used with other substrates.
- Less maintenance; cloning, transplanting and harvesting plants is less time consuming and laborious, because The Spinner gets the most out of each plant.
- Better environmental control; we have out done our competitors again by enclosing the system, allowing better options for atmosphere control
How it Works
Light (not included)
Lower wattage saves money directly, and due to the exceptional growing conditions of The Spinner there is no sacrificing yield. A 430 watt bulb is recommended, but more experience growers may use up to a 600 watt HPS, to increase their yield.
Doors
Light gauge, light weight, aluminum doors that are scratch resistant and will not rust or breakdown from UV exposure. The doors fit into moulded tracks at the base and lid of the Spinner and slide along the circumference to FULLY ENCLOSE THE MACHINE or expose 6 plants at a time.
Atmosphere
One 5″ air diffuser is centrally mounted in the base of the Spinner, one 110 CFM fan blows through this diffuser and the air is directed 360 degrees from the center onto the plant foliage. Air is exhausted by an additional 110 CFM fan located on the top of the Spinner. the volume of the chamber is approximately 20 cubic feet.
Root Chamber
The root chamber is equipped with all the plumbing needed for flood and drain operation. The chamber is enclosed to inhibit contaminants from entering. New as of May 2011, the AeroRingTM, for accelerated root growth.
Space Usage
The Spinner requires no additional hardware to stack, thereby saving floorspace (stacking more than three Spinners high is not recommended).
Plants
The Spinner has plants situated beside the light source and as the plant attempts to grow toward the light it is rotated away. This action results in symmetrical, extremely strong, healthy plants with supercharged yield and quality.
Feeding mechanism
Reliable, Ebb-and-flow hydroponics is the standard method of feeding (overflow drain included).
Additional Information
| Video | No |
|---|---|
| Downloads | No |
| Directions | No |
| Manufacturer | Spinner Hydroponics |
| Filter By | No |
|
The Spinner is a fully enclosed hydroponic plant growth chamber in which the plants are automatically rotated ON THEIR OWN AXIS, exposing the plant to a vertically mounted, central light source. Roots in the chamber are feed hydroponically via “ebb-and-flow”. The atmosphere is controlled via two 100+CFM intake/exhaust fans. What this means is that the plants within the Spinner receive the ultimate care with very little maintenance. Typically the Spinner will yield a greater dry plant mass with only 600 watts of power than a traditional hydroponic system using over 1000 watts and the quality that comes from the Spinner is exceptional!
The Spinner offers the same yield-per-watt ratio as hydroponic systems that use over 10x the number of plants. Due to the fact that plants in the Spinner are rotated on their axis they are able to grow much larger without growing into the hot agricultural bulb. Eye hole snaps are located in the lid of the Spinner so that plants can be tied when they start to put on weight.
Using fewer plants has many advantages including, but not limited to:
How it Works
Light (not included)
Lower wattage saves money directly, and due to the exceptional growing conditions of The Spinner there is no sacrificing yield. A 430 watt bulb is recommended, but more experience growers may use up to a 600 watt HPS, to increase their yield.
Doors
Light gauge, light weight, aluminum doors that are scratch resistant and will not rust or breakdown from UV exposure. The doors fit into moulded tracks at the base and lid of the Spinner and slide along the circumference to FULLY ENCLOSE THE MACHINE or expose 6 plants at a time.
Atmosphere
One 5″ air diffuser is centrally mounted in the base of the Spinner, one 110 CFM fan blows through this diffuser and the air is directed 360 degrees from the center onto the plant foliage. Air is exhausted by an additional 110 CFM fan located on the top of the Spinner. the volume of the chamber is approximately 20 cubic feet.
Root Chamber
The root chamber is equipped with all the plumbing needed for flood and drain operation. The chamber is enclosed to inhibit contaminants from entering. New as of May 2011, the AeroRingTM, for accelerated root growth.
Space Usage
The Spinner requires no additional hardware to stack, thereby saving floorspace (stacking more than three Spinners high is not recommended).
Plants
The Spinner has plants situated beside the light source and as the plant attempts to grow toward the light it is rotated away. This action results in symmetrical, extremely strong, healthy plants with supercharged yield and quality.
Feeding mechanism
Reliable, Ebb-and-flow hydroponics is the standard method of feeding (overflow drain included).
|
Questions on The Spinner Plant Rotation Vertical GardenNo questions asked yet Ask Your Own Question |
Write Your Own Review
My Cart
You have no items in your shopping cart.
Recent Reviews
-
great product to choose from.
Easy to use, well built meter. The probe is easy to clean, definitely recommend.
(Review by William1987)
Community Poll
Newsletter