Details
The HPR-1 is perfect for controlling higher loads such as large air conditioners or multiple HID ballasts. You supply 240 volt power to the input side of the HPR-1. The air conditioner or ballasts to be controlled are then hard-wired into the output side of the relay. The 16' trigger cable coming from the HPR-1 is then connected to your control device such as a timer, thermostat, or environmental controller. When the device applies power to the trigger cable, the relay in the HPR-1 applies power to the connected equipment. The HPR-1 is rated at 30 amps @ 240 volt.
- HPR-1 is hard wired 30 Amp capacity, 240V power relay controls multiple lights up to 30 Amps
- Supply 240 volts to input side of the relay
- Hard wire appliances to into the output side of the relay
- 16 Ft trigger cable coming from the HPR-1 is then connected to time clock, thermostat, or controller
- 3-year rebuild or replace warranty
Additional Information
| Video | No |
|---|---|
| Downloads | No |
| Directions | No |
| Manufacturer | Custom Automated Products |
| Filter By | N/A |
The HPR-1 is perfect for controlling higher loads such as large air conditioners or multiple HID ballasts. You supply 240 volt power to the input side of the HPR-1. The air conditioner or ballasts to be controlled are then hard-wired into the output side of the relay. The 16' trigger cable coming from the HPR-1 is then connected to your control device such as a timer, thermostat, or environmental controller. When the device applies power to the trigger cable, the relay in the HPR-1 applies power to the connected equipment. The HPR-1 is rated at 30 amps @ 240 volt.
- HPR-1 is hard wired 30 Amp capacity, 240V power relay controls multiple lights up to 30 Amps
- Supply 240 volts to input side of the relay
- Hard wire appliances to into the output side of the relay
- 16 Ft trigger cable coming from the HPR-1 is then connected to time clock, thermostat, or controller
- 3-year rebuild or replace warranty

